Request a quotation
If the instrument has never been calibrated at our calibration centre, register your instrument when requesting a quotation.
If you have already registered and calibrated the instrument at our calibration centre, request a quotation using the short form.
| Acceleration
Sector Manager: Stefano Bionda
Campus Bovisa
Via La Masa, 34
20156 - Milano
Telephone: 02.2399.8251
Mail: taratura@polimi.it
The sector performs the calibration of acceleration transducers with the comparison method in accordance with the reference standards ISO 16063-21-2002 and SIT/TEC.005/03.
The acceleration transducers must weigh less than 320 g and be of the following types: ICP Sensors, capacitive sensors, piezoresistive sensors, and sensors equipped with an external chain that emits voltage signals.
|
Instruments in calibration |
Measurand |
Additional parameters |
Measuring range |
Uncertainty |
Method / Procedure |
||
|
Accelerometric chains, single-side transducers |
Acceleration |
≥ 0,1 Hz |
≤ 0,5 Hz |
≥ 0,05 m·s-2 |
≤ 1 m·s-2 |
1,5% |
Metodo interno. |
|
> 0,5 Hz |
≤ 10 kHz |
> 1 m·s-2 |
≤ 200 m·s-2 |
2,0% |
ISO 16063-21:2003 (excluding the phase shift) |
||
Certificate delivery time: 20 working days from the execution of the measurements
